Standard Pneumatic Pipe Plugs
Standard Pneumatic Pipe Plugs
Plugs are durable, rugged and effective in any type of pipe.
The contractor's choice for years and continues to be the most trusted pneumatic test ball in the industry. Designed for applications from pressure testing and blocking of residential DWV systems to repair maintenance and installation of municipal infrastructure including storm and sanitary sewer piping systems.
Additional Details - Download Product FlyerPDF
Plug Size & Part Number
Inflation Hose
$ 211.00
×
Pneumatic Plugs With Bypass
Pneumatic Plugs With Bypass
These Plugs offer a full bypass allowing both testing and monitoring of the piping system. Plugs are ideal for installation and repair of residential or commercial piping applications. Plugs can be used for maintenance of municipal infrastructure, including sanitary and storm sewer pipe systems. Plugs are durable, rugged and are effective on almost any type of pipe.
Additional Details - Download Product FlyerPDF
Plug Size (P), By Pass (BP) Size & Part Number
Inflation Hose
$ 99.00
×
Inflatable Pillow Pipe Plugs
Inflatable Pillow Pipe Plugs
Plugs are great for blocking sewer flow in the event of spills
Made from heavy-duty elastic urethane, these plugs are lightweight, flexible, chemical and petroleum-resistant, and will fit through small-diameter openings. Pillow-style plugs can be tethered with the attached tether bars, and will work in all types of pipe, including ductile iron sizes.
Equipped with a special 30' inflation hose, read-back line and gauge.
Additional Details - Download Product FlyerPDF
Plug Size & Part Number
$ 978.00
×
Inflatable Pillow Plugs with Bypass
Inflatable Pillow Plugs with Bypass
Connect Hose to Pump Truck or Temporary Bladder
Made from heavy-duty elastic urethane, these plugs are lightweight, flexible, chemical and petroleum-resistant, and will fit through small-diameter openings. Pillow-style plugs can be tethered with the attached tether bars, and will work in all types of pipe, including ductile iron sizes. Equipped with a special 30' inflation hose, read-back line and gauge.
Additional Details - Download Product FlyerPDF
Plug Size & Part Number
$ 2,143.00
×
REMO - Remote Placement Plugs
REMO - Remote Placement Plugs
The Remo® Remote Placement plug provides two advantages—it eliminates the need to enter confined spaces and speeds up the pipe plugging process. The system is safer and less expensive to use than conventional plugging methods because it requires no confined space equipment to simply block sewer flow. A lightweight aluminum pole system* or a standard 1¼" iron pipe** is used to place the Remo® plug in the sewer system.
Additional Details
Plug Size & Part Number
$ 334.00
×
Long test Ball
Long test Ball
Long Test-Ball® plugs are designed for waste stack testing—sealing the rise and the run to perform the test. These long ball plugs can also be used to seal the wye to conduct sewer air tests. Molded-in sealing ribs at each end of the plug ensure a leak-free seal.
Additional Details
Plug Size & Part Number
$ 54.00
×
Big Mouth Flow-Through
Big Mouth Flow-Through
Big-Mouth® plugs for gravity bypassing or bypass pumping
-The Original Big-Mouth® Plug
-Multi-Size Big-Mouth® Plug with Interchangeable Flanges:
-Multi-Size Big-Mouth® Plug with Interchangeable Flanges:
Additional Details
Plug Size & Part Number
$ 361.00
×
Factory Replaceable Sleeve Muni-Ball
Factory Replaceable Sleeve Muni-Ball
Factory Replaceable Sleeve Muni-Ball® Plugs are designed to block or bypass sewage flow as well as conduct low pressure sewer air tests. This plug can be used for both line acceptance testing and leak location testing. The sleeve on this plug can be repaired at Cherne for less than the cost of a new plug. Made of natural rubber reinforced with polyester cording, these plugs work well both in round and elliptical pipe.
Additional Details
Plug Size & Part Number
$ 731.00
×
Jet-Ball - Pipe Line Cleaning Balls
Jet-Ball - Pipe Line Cleaning Balls
• Inexpensive method for cleaning new lines prior to line acceptance testing
• Also for cleaning grease out of existing lines–the better alternative to an expensive jet truck
• Made of natural rubber
Additional Details
Plug Size & Part Number
$ 202.00
×
Air Loc Leak Locator Plugs
Air Loc Leak Locator Plugs
Air-Loc® leak locator plugs are designed for both low-pressure sewer line acceptance tests as well as leak location testing. Air-Loc® plugs can also be used to block flow by simply plugging the fill and read-back ports.
Additional Details
Plug Size & Part Number
$ 379.00
×
Protective Sleeves
Protective Sleeves
Greatly reduces possibility of damage to plug due to debris and sharp objects in the pipe. The protective sleeve also protects plugs when the pipe is degraded. Works particularly well in coastal areas where oysters and barnacles are present.
Additional Details
Plug & Sleeve Size
$ 2,549.00
×
Elliptical Plug Conversion Chart Pdf Download - Click Here